Current Stock
Showing 101–200 of 208 results
-
D1-6 Burnerd Multisize collet set.
£375 -
D1-6, 250mm 3 jaw chuck
£169 -
D1-8 large face plate
£179 -
Dickson T1 Parting off toolholder and blade
£44 -
Drill return springs Inc. Elliott Progress, Meddings & others.
£30 -
Eclipse Magnetic Chuck
£95 -
Eclipse V blocks pair
£29 -
Elliott Progress Drill return spring housing
£29 -
Elliott Victoria 4.5″ machine vice
£95 -
EMG 1HP single phase 2800rpm E motor
£50 -
Hardinge 5C dead centre
£39 -
Hardinge HLV-H 66T change gear
£49 -
Hardinge HLV-H Apron and tailstock handles
£140 -
Hardinge HLV-H complete Tailstock
£185 -
Hardinge HLV-H imperial top slide screw nut and dial.
£175 -
Hardinge HLV-H original 4 jaw chuck
£269 -
Hardinge HLV-H screw nose face plate
£89 -
Hardinge HLV-H Speed control front panel
£95 -
Hardinge HLV-H Spindle Nose cover
£35 -
Harrison M250 Screw cutting chart plate.
£29 -
Harrison M300 / Student 2500 New screw cut gearbox front cover plates.
£29 -
Harrison M300 cross slide handle and metric dial
£49 -
Harrison M300 Cross slide handle with dual dial assembly
£129 -
Harrison M300 Headstock spindle reducing sleeve
£49 -
Harrison M300 top slide handle with dual dial assembly
£99 -
Hilmor pipe bending formers
£39 -
Hirayama PC-242HS-A Pressure oven
£450 -
HPC Sigma Screw Compressor oil
£35 -
HSS Milling cutters, job lot of 55.
£120 -
Imperial BCA collets.
£27 -
Iscar New self grip carbide insert parting off/groove blade.
£45 -
Jobbing drill bits, mostly new, job lot
£29 -
Jones and Shipman 540 wheel head guard assembly
£149 -
L0 Burnerd 4 jaw chuck
£169 -
L0 Burnerd Multisize Collet head.
£75 -
L0 cast iron 18″ face plate
£50 -
L00 15″ cast iron face plate.
£69 -
L00 3 jaw chuck
£149 -
L00 6″ catch / back plate
£39 -
L00 9″ original cast face plate
£75 -
Large 1″ R8 Clarkson Autolock.
£45 -
Large 3 point fixed lathe steady
£149 -
Large 40 Int. Clarkson Autolock
£90 -
Large Jacobs 2MT drill chuck, 20mm capacity
£49 -
Lathe Fixed 3 point steadies
£30 -
Leroy-Somer 1/2HP single phase front flange mount E motor
£60 -
Machine Handles
£20 -
Magnetic close pole transfer blocks/parallels, pair
£29 -
Marlco Collets set
£59 -
Meddings 10 speed drill press NEW Top Belt Cover
£49 -
Meddings 62mm original new old stock metal hinged chuck guard.
£69 -
Meddings 80mm head support safety collar with integral tool tray.
£65 -
Meddings drill press 80mm Safety collar.
£35 -
Medium size T slotted box cube
£125 -
Medium/Large Angle plate
£90 -
Metal Cleervue Drill press chuck guard with 65 or 92mm clamping collar mount
£59 -
Metal Cleervue drill press chuck guard, flange mount
£59 -
Metal Drill press Chuck Guard.
£49 -
Metric Micrometers
£15 -
Mitutoyo 0-25/1″ digital Micrometer.
£69 -
Multifix type A parting off toolholder with blade
£60 -
Multifix Type A Toolpost Set.
£329 -
Multifix Type AH2085 V bottom toolholder
£49 -
Myford 6 inch Pratt Burnerd 4 jaw independent chuck
£139 -
Myford MG12 cylindrical grinder internal spindle
£99 -
Myford Super 7 change gear complete end guard assembly
£49 -
Myford swivelling vertical milling slide
£125 -
New (old stock) packs of Tungsten Carbide Indexable Inserts
£25 -
New 6″ diameter, 1″ bore Horizontal milling cutters x 6
£39 -
New Cross slide screw and half nuts
£100 -
New large Power hacksaw blades x 2
£28 -
Pair of modified carbide insert turning tools
£45 -
Pigs tail taper mount 8″ rotary wire brush
£35 -
Plain back 160mm 3 Jaw chuck.
£65 -
Pratt Burnerd 5″ plain back 3 jaw chuck
£95 -
R8 Albrecht 3-16mm Keyless drill chuck
£65 -
R8 Clarkson Autolock collet chuck set
£60 -
R8 Golden Goose Keyless drill chuck.
£59 -
R8 Jacobs No. 3 drill chuck
£45 -
R8 Metric collets selection
£39 -
RDC Drivloc D. C Injection brake
£150 -
Record No. 52 1/2 quick release woodworkers vice.
£85 -
Record Professional hand Engraver
£20 -
Sandvik 23mm carbide insert boring bar
£45 -
Sandvik Heavy Duty Internal groove carbide Insert tool
£59 -
Sandvik S25T-PDUNR 11 Carbide insert Boring bar
£69 -
Sandvik Tungsten Carbide indexable inserts
£25 -
Sanvick C5-MAS-11
£250 -
Schaublin 116mm dividing plates
£99 -
Schaublin Griptru 3 jaw chuck
£375 -
Schaublin W12 Collets.
£385 -
Schaublin W20 1/4 hex collet
£29 -
Seco 20mm carbide insert U drill
£45 -
Seco carbide insert U drill
£35 -
Seco STGCR 2020K 16 general purpose carbide insert turning tool
£39 -
Selection of 10 off 5C Imperial collets.
£35 -
Selection of 15 off 1″ bore fine slitting saws
£39 -
Selection of Metric taps
£39 -
Set of 32nd Crawford Trugrip 5C collets
£95 -
Set of new 1250mm powered Guillotine blades.
£595